Sparkle Pill
$3.99New from Spec Chem Direct is the powerful Sparkle Pill that quickly clears cloudy pool water. The convenient toss-n-go pill is particularly effective with sand filters and is compatible with all sanitizer systems. This no-mess product leaves no sticky residue and it dissolves quickly; simply drop it in the skimmer to maintain water clarity.
Maintain pH Decreaser
$9.99 – $19.99Maintain pH Decreaser lowers the pH level in your swimming pool. High pH can cause scaling, cloudy water, eye and skin irritation and discomfort. pH levels should be maintained in the range of 7.2-7.6 ppm.
Available Size: 7 lbs.
Pristine Clear
$10.99 – $39.99Pristine Clear, clears cloudy water in pools and spas by bringing suspended particles together, enabling  them to be better removed by your filtration system.
Pristine Power
$14.99 – $59.99PristinePower is a non-chlorine oxidizer or shock. It removes odors and organic materials, contaminants and body oils that cause cloudy water without affecting pH.
- It dissolves quickly and removes odors and organic materials, contaminants, and body oils that otherwise build up and cause cloudy or dull water. Made with DuPont Oxone and formulated with a neutral pH to work ideally with the PristineBlue system.
- Weekly or biweekly shocking is recommended for pools. Unlike chlorine shocks, it is safe for swimmers to enter the pool within 15 minutes!
- Application rate: One pound per 10,000 gallons, biweekly or weekly.
Pristine Extra
$14.99 – $279.99Pristine Extra is used in the start up of the Pristine Blue chemical system. This chlorine shock dissipates rapidly, thus bringing your pool or spa back to a non-chlorine status quickly. Pristine Extra may also be used for troubleshooting pool and spa water.
Contains 99% sodium di-chlor (granular chlorine). It is an effective shock treatment that can be used at start-up, routine maintenance or for troubleshooting as needed. It is a primary sanitizer.
poolife pH Plus
$14.99Poolife pH Plus is quick dissolving and raises the ph level in your swimming pool. Which allows your sanitizer to work more efficiently. You should maintain a pH level of 7.2-7.6 ppm to avoid eye and skin irritation and discomfort.
Maintain Alkalinity Increaser
$14.99Eliminates “pH bounce,” which is an assortment of pH fluctuations caused by disproportionate quantities of any added chemicals, especially low alkalinity levels. Raises the total alkalinity. Tests the total alkalinity of the water and keeps it within the proper range of 80-120 ppm. Helps prevent equipment and spa surface corrosion and damage.
Available Size: 5 lbs.
PristineBlue Mini Test Kit
$14.99Pristine Blue Mini Test Kit measures the Pristine Blue level in your water allowing you to accurately add additional dosages if needed.
Directions
- Fill tube to the 10 ml line with the sample water.
- Add 5 drops Copper A to tube. Cap and invert tube to mix.
- Remove cap and add 5 drops of Copper B to tube. Cap and invert tube to mix.
- Insert tube into holder. Wait 3 minutes for full color development.
- Remove cap. Place bottom of tub on white area of color chart. Match color by looking down trough the tube.
Muriatic Acid
$16.99Champion Packaging offers the highest quality of water white Muriatic Acid. Champion’s Muriatic Acid is NSF 60 certified for water treatment.
Available Size: 1 gallon
Natures Pure Re-Energizer
$19.99 – $29.99Natures Pure Re-Energizer is a great additive to any pool system as a multipurpose product. Natures Pure Re-Energizer reduces the amount of carbon dioxide in the water, which helps restrict the growth of algae in your water.
Using Re-Energizer as part of your weekly pool treatment will help improve the sanitizer’s efficiency. Re-energizer reduces skin and eye irritations. When partnered with the Nature’s Pure Purifier, it maintains the necessary level of Total Dissolved Solids. It helps to soften the feel of your pool water, as well as maintaining clear, sparkling water.
Maintain Super Pool Water Clarifier
$19.99Our Super Concentrated Swimming Pool Clarifier is an extra-strength pool water clarifier that clears extremely cloudy pool water caused by poor filtration, dust, pollen, dead algae or chemical residue. Our pool water clarifier is designed to coagulate and floc suspended solids from swimming pool water. The solids will be filtered out of the pool.
Compatible with all pool chemicals systems such as Baquacil, Salt, Chlorine and Pristine Blue chemical systems.
Maintain Calcium Hardness Increaser
$23.99Water needs calcium hardness. If your levels are too low, a small addition of Calcium Hardness Increaser brings the levels up safely while not clouding the water. When levels are ideal, you will prolong the life of your pool or spa.
- Prevents water from becoming corrosive and damaging your pool’s plumbing and heater
- Helps maintain calcium hardness levels between 150-300 ppm
- Stops staining and etching of pool surfaces caused by low hardness levels
poolife Flocculant
$24.99Flocculant eliminates water haze and cloudy water in swimming pools. Can be used as either a pool flocculant or as a filter aid, depending upon the severity of the cloudiness.
Useful Tips
- If the pool is cloudy and the bottom is visible, follow the directions for use as a filter aid.
- If the pool is cloudy and the bottom is not visible, follow the directions for use as a flocculant (filter must be able to vacuum to waste).
AVAILABLE SIZE: 2.25 lbs.
poolife Gold Medal Clarifier
$29.99Gold Medal Clarifier clears and brightens cloudy water by coagulating suspended micro-size particles of dirt and other organic contaminants into masses large enough to be removed by the filter. Its unique color changing technology turns it from gold to blue to indicate that it’s working.
Useful Tips
- Highly concentrated formula – 1 fl. oz. treats 6,000 gallons!
- Clears cloudy water fast and prevents future hazy appearance
- Regular use of Gold Medal Clarifier will help the filtration of dirt and contaminants
- Compatible with all sanitizers including bromine, chlorine, salt water, ozone, minerals and biguanide
AVAILABLE SIZE: 32 fl. oz.
poolife Stain Stop
$36.99Poolife Stain Stop provides protection against scale, stains and rust caused by minerals in the water such as iron, copper, nickel, manganese, silicon and zinc. Effective at controlling stains after the use of poolife Stain Lift.
Useful Tips
- For best results, add the required amount of poolife Stain Stop when you start to fill the pool unless the surface is black plaster, then add it after the pool is full.
- Compatible with chlorine, bromine, salt water, ozone and minerals.
Available Size: 32 oz
poolife Intensive Stain Prevention
$38.99Intensive Stain Prevention provides protection against scale, stains and rust caused by minerals in the water, such as iron, copper, nickel, manganese, silicon and zinc. Concentrated and stable in water at high temperatures.
Useful Tips
- Can be used at initial pool fill, for preventative maintenance, and for existing metals treatment.
- Follow label directions for your specific treatment dosage and procedure.
AVAILABLE SIZE: 32 fl. oz.
Just follow the maintenance program every 2 weeks. PristineBlue is EPA registered in all 50 states, is NSF 60 Certified and gentle on equipment. It is compatible with most systems including salt and chlorine. PristineBlue is safe to use on all pool and spa surfaces.
