Showing 1–9 of 31 results

Astral CTX 1.0 HP Single Speed Pool Pump

$799.99

30 Day Limited Warranty with Sale Price

The Astral Pool CTX pump has been designed to comfortably meet the needs and pressures required by your swimming pool and spa equipment. Made from high quality materials and components the CTX is designed to produce greater efficiency and reduce noise levels. Suitable for in-floor cleaning systems, spa jets and other demanding applications the CTX will provide a high performance and reliability.

  • Incorporates a large lint pot requiring less maintenance
  • Connects with the Genus controller system
  • Reduced operating noise
  • Made from quality components

Guardian Series 280 lbs 1.5 HP MX Pump Sand Filter

$599.99

Whether it is a residential or commercial installation, Carvin’s pool and spa filters offer easy maintenance.

Specifications

Model Item Number: 9794
Size: 23
Features
  • Upper distribution system integrated into the dial valve and engineered to direct water evenly across the entire surface of the sand – up to 25 gpm/sq.ft. (61 m3/h/m2) without sand migration or channeling. 6-way dial valve with “sight glass” automatic air relief and pressure gauge.
  • Non-Corrosive resin clamp for simple installation and service of dial valve and filter components.
  • Underdrain with “side-slotted” laterals draws water evenly across the full diameter of the sand bed for higher flows and better filtration.
  • Longer cycles and more efficient backwashing.
  • Freeze resistant hub and easy-service laterals.
  • Deep high-capacity sand bed carries more debris and extends filter cycles. Blow-molded tank is corrosion-resistant and UV-resistant. Bottom drain for winterizing and draining. Hose and hardware included.

Waterway 1.0 HP 2-Speed Above Ground Pool Pump

$379.99

The pump has a large 6″ debris basket. It is connected to the pump housing with a union nut, this makes it easy if you need to rotate the head, as the basket can be remounted with no problem once you have rotated the head. Pumps come with a 3′ long power cord, with the standard 3 prong plug. This pump is ready to go when you receive it. Simply remove the pump from the box, open the cover on the debris basket, where you will find the gasket that needs to be inserted into the basket nut and then simply install the basket on the face of the pump. Reinstall your hoses from your old pump, connect them to the pool filter and simply plug in the pump. Be sure the pump is full of water before you power up the pump so that you do not burn up the pump shaft seal. Not self-priming, pump head must be below water level. 1 Year manufacturer warranty.

  • 1.0 hp, 2-Speed, 11.0/2.9 amps, 115V, 60hz. – Automatic Overload Protection
  • Hi-Flo Side Discharge – Large 6″ Debris Basket with see thru cover
  • Wet End Can Be Rotated – 1.5″ NPT Internal Threads for screwing in Hose Adapaters/Threaded PVC
  • 3 foot Cord with Standard NEMA 3-Prong Plug
  • 2-Speed Switch on bottom of motor cover

150-Square Feet Replacement Cartridge

$119.99

This 150 sq. ft., 8 15/16″ OD Pool or Spa Filter has a 4″ Open Hole Top, a 4″ Open Hole Bottom, and is 23 5/16″ long. It is crafted of the highest quality materials; and engineered to be superior. Made in the USA using the highest quality fabric that removes unwanted bacteria and contaminants, keeping your water crystal clean.

  • Filters Bacteria & Contaminants
  • Eco Friendly Filter Cartridge
  • Extremely Durable – Wash & Reuse
  • Withstands High Pressures & Temperatures
  • Energy Efficient
  • Easy Installation

Hint: keep an extra filter on hand so that when its time to clean your filter, you will be able to replace it immediately with the back-up. This will allow you the time to leisurely deep clean your dirty filter and allow it to dry completely before replacing it; and without any down time on your pool or spa system.

FC-1286, C-8414, PWWCT150, AK-70017

155-Square Feet Replacement Cartridge

$119.99

A strong, long lasting replacement filter cartridge. This single cartridge replacement contains an area of 155 sq. ft. of filtration capability. It is crafted of the highest quality materials; and engineered to be superior.

Dimensions:
  • Length: 17.55″
  • Outer diameter: 8.85″
  • Inner diameter (Top): 2.93″
  • Inner diameter (Bottom): 2.93″

ZX310 Replacement Cartridge – OEM – 78088

50-Square Feet Replacement Cartridge

$49.99

This 50 sq. ft. Pool or Spa Filter is crafted of the highest quality materials; and engineered to be superior. Made in the USA using the highest quality fabric that removes unwanted bacteria and contaminants, keeping your water crystal clean.

  • Filters Bacteria & Contaminants
  • Eco Friendly Filter Cartridge
  • Extremely Durable – Wash & Reuse
  • Withstands High Pressures & Temperatures
  • Energy Efficient
  • Easy Installation

Hint: keep an extra filter on hand so that when its time to clean your filter, you will be able to replace it immediately with the back-up. This will allow you the time to leisurely deep clean your dirty filter and allow it to dry completely before replacing it; and without any down time on your pool or spa system.

Filter Specifications:

  • Square Footage: 50 sq. ft.
  • Media/Thickness: 3
  • Diameter: 4-15/16″
  • Length: 6-5/8″
  • Top: 2-1/8″ Hole
  • Bottom: 2-1/8″ Hole

817-5010, C-4405, FC-2387, AK-3026, FL700-211

50-Square Feet Replacement Filter with By-Pass Valve

$99.99

Waterway 500-5010 50 Sq. Ft. Top Load 1.5″ Cartridge Filter with Bypass Valve.

Features:

  • A metal header design allows for the higher working pressures required by ASME.
  • This tubing is over 50% thicker in wall thickness than standard tubing.
  • The Unitherm Governor automatically regulates the water flow to help keep the water temperature in the heat exchanger above 105 Degrees F.

Astral CTX 1.5 HP Single Speed Pool Pump

$849.99

30 Day Limited Warranty with Sale Price

The Astral Pool CTX pump has been designed to comfortably meet the needs and pressures required by your swimming pool and spa equipment. Made from high quality materials and components the CTX is designed to produce greater efficiency and reduce noise levels. Suitable for in-floor cleaning systems, spa jets and other demanding applications the CTX will provide a high performance and reliability.

  • Incorporates a large lint pot requiring less maintenance
  • Connects with the Genus controller system
  • Reduced operating noise
  • Made from quality components